ACU doesn't detect msa1000 via qla3212

[Matthias Eble]

hi all,

i've been trying to get ACU to display the two attached msa1000 arrays. Unfortunately, it hasn't worked yet.

system-configuration:
dl380g4 suse enterprise 9 (x86 install)
qla2312 fc-card

booting from the management cd works fine.
I can also reach/use the devices from the OS without any problems.

steps, i've already done:
- installing shipped cpqacuxe-6.45-1.linux.i386.rpm (using sles9 default qlogic driver)
- also tried cpqacuxe-7.15-19.linux.i386.rpm cpqacuxe-7.16-2.linux.i386.rpm
cpqacuxe-7.17-1.linux.i386.rpm

- install of shipped hp_qla2x00src-7.00.03-2004-05-20.tar.gz failed (I suggest caused by kernel 2.6)
- downloaded hp_qla2x00-2004-10-19.tar.gz; installed; rebooted


before installing cpqacuxe-7.16-2.linux.i386.rpm I couldn't see any device via web-gui. After that, i have been able to see the internal scsi controller of the dl380.

I use remote-acr via firefox and ie.

any suggestions?

thanks.

[Matthias Eble]

Hi!
thanks for your numerous replies.

It has been working since I installed the latest version (7.20-19) of cpqacuxe


bye