HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

ACU mirror rebuild questions

Jim Cross_1
Occasional Contributor

ACU mirror rebuild questions

We have 14 drives in a mirrored array with 5304 array controller. There was a message that a drive failed with error 0x14 and then the next error indicated the drive was inserted. We got this same cycle of error saying failed drive and then drive inserted for all the drives in the mirror. When looking in the ACU it showed the array rebuilding to 100% and then starting over again at 0% and rebuilding. It completed the rebuild and started again for all of the drives in the array. Is this how it should do the rebuild? Should it fail and rebuild every drive in the array one at a time?
David Lochhead
Frequent Advisor

Re: ACU mirror rebuild questions

If this happened without replacing any drives give tech support a call. You might be having problem with your SCSI backplane or 5300