HPE Community
ProLiant Servers (ML,DL,SL)
1753505 Members
4774 Online
108794 Solutions
New Discussion

Re: ACU will not detect Array Controller

 
Ayman Altounji
Valued Contributor

‎02-25-2001 04:00 PM

‎02-25-2001 04:00 PM

ACU will not detect Array Controller

Two 9GB hot-swap drives are seen as one logical drive to NT/Linux.

ACU will not run from NT, but running it directly from CD and it says there is no array controller in the system.

How can I configure the array?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎02-28-2001 04:00 PM

‎02-28-2001 04:00 PM

Re: ACU will not detect Array Controller

Run the System Configuration Utility , make certain a Smart Array controller is installed . If so , make certain the Smart Controller is configured as "Controller Order First " .
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.