HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ADU "DRIVE ERROR LOG" ?

 
Santa Claus rpm
Occasional Visitor

ADU "DRIVE ERROR LOG" ?

ADU report see attachment.
Q1. What is "DRIVE ERROR LOG" ?
Q2. Where to find the description of errors "DRIVE ERROR LOG" ?
3 REPLIES
kvelayutham
Advisor

Re: ADU "DRIVE ERROR LOG" ?

The drive error log shows for each SCSI drive connected to a Smart Array controller holding the last 20 errors that occurred on the drive. Each of the error records contains an error description and a time stamp showing when the error occurred. The total number of errors that have occurred since the drive has been in operation are displayed in the Error Log heading.

below are the meaning for some errors reported in your log:

SCSI Status Codes

Code SCSI Status Description
00 Good
02 Check Condition


CAM Status Codes

04 - Request Completed with Error
0e - SCSI Bus Reset Sent/Received

Which means that some SCSI command completed with error or some receoverable error occured in the drive. but, it doesn't mean that the drive require replacement.
Santa Claus rpm
Occasional Visitor

Re: ADU "DRIVE ERROR LOG" ?

Thanks.
However it would be desirable to see the documentation with the description of all possible errors.
Do not know where it download?
Roy Main
Valued Contributor

Re: ADU "DRIVE ERROR LOG" ?

You can find many of the codes documented in the SCSI specification.

http://t10.org

Sense Code & Sense Code Qualifiers: SPC-2 Annex C

Status Codes: SAM-2 Table 12

Sense Keys: SPC-2 Table 72

Don't know where the CAM status codes and OP codes are. And there may be newer versions of these charts than the ones I quoted.