ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

AGetty dies after 60 sec

W Sanders_1
Frequent Advisor

AGetty dies after 60 sec

We are trying to get serial access on some DL-380s. We have the "usual" entry in /etc/inittab:

/sbin/agetty -L ttyS0 9600 vt100

The agetty dies after 60 sec on one of the DL-380s (respwns every 60 sec if we have it in inittab). Everything works fine on the other DL-380. Running RHEL ES3. The systems are configured identically as far as I can tell, but they are in remote locations so I don't have physical access.

Any ideas?




"There is no truth to the rumor that all employees are going to be required to have lobotomies ... at least at the prices we were quoted" -Dilbert
2 REPLIES
W Sanders_1
Frequent Advisor

Re: AGetty dies after 60 sec

If anyone has any ideas, please respond to this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=837404

Thanks.
"There is no truth to the rumor that all employees are going to be required to have lobotomies ... at least at the prices we were quoted" -Dilbert
W Sanders_1
Frequent Advisor

Re: AGetty dies after 60 sec

xxx
"There is no truth to the rumor that all employees are going to be required to have lobotomies ... at least at the prices we were quoted" -Dilbert