ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ASR Detected by System ROM

Boesiger
Occasional Contributor

ASR Detected by System ROM

Since some Day's we have a strange thing happenend with c7000 Blade System and BL480G5 and BL460G5.
does anybody know about it?
regards
Rolf
5 REPLIES

Re: ASR Detected by System ROM

The ASR message means that your server as been rebooted after an unrecoverable error. The other messages seems to announce some trouble with memory. You should check the Ram on your servers.
Boesiger
Occasional Contributor

Re: ASR Detected by System ROM

Hi
RAM was allready checked.
and we also replaced allready 2 Servers with RAM not reconized.
sandeep_raman
Honored Contributor

Re: ASR Detected by System ROM

1) What is the OS on the server blades?
2) What is the PSP version?
3) Disable ASR (for troubleshooting purpose only)
4) Depending on the OS on the server blade, enable OS dump and get it analyzed by MS or Linux vendor

This'll give you a fair idea what to do next. If you are still lost, log a support call
Boesiger
Occasional Contributor

Re: ASR Detected by System ROM

Hi all
I just openend a support with HP and there was an error with the
HP ProLiant iLO 2 Management Controller Driver 1.9.0.0
replaced it with the 1.11.1.0 version and i hope it is the solution.
thanks to all anyway.
Also you can see errors 57 within event log of the w2k8 server, see attachment
Boesiger
Occasional Contributor

Re: ASR Detected by System ROM

Hi all
I just openend a support with HP and there was an error with the
HP ProLiant iLO 2 Management Controller Driver 1.9.0.0
replaced it with the 1.11.1.0 version and i hope it is the solution.
thanks to all anyway.
Also you can see errors 57 within event log of the w2k8 server, see attachment