cancel
Showing results for 
Search instead for 
Did you mean: 

ASR ML370 G5

Raducanu Robert
Occasional Contributor

ASR ML370 G5

How could I find out what generated the ASR on a Proliant ML370 G5 server that runs Windows Server 2003 R2? In IML I can find only the ASR event and not the reason for ASR.

In the Eventlog - System the following event is listed:

Event Type: Error
Event Source: HP System
Event Category: System Power
Event ID: 1
Date: 6/1/2010
Time: 11:59:02 PM
User: N/A
Computer: BV1SV003S
Description:
The system has rebooted from a Automatic Server Recovery (ASR) event.

User Action
Determine the nature of the Automatic Server Recovery (ASR) event, and take corrective action.

WBEM Indication Properties
AlertingElementFormat: 0 0 (Unknown)
AlertType: 5 0x5 (Device Alert)
Description: "The system has rebooted from a Automatic Server Recovery (ASR) event."
EventCategory: 16 0x10 (System Power)
EventID: "1"
ImpactedDomain: 4 0x4 (System)
IndicationIdentifier: "{850D8E5E-15EA-45C6-B9BC-AA20DA4B0287}"
IndicationTime: "20100601235853.917000+180"
NetworkAddresses[0]: "192.168.1.96"
NetworkAddresses[1]: "10.10.1.95"
OSType: 69 0x45 (Microsoft Windows Server 2003)
OSVersion: "5.2.3790"
PerceivedSeverity: 5 0x5 (Major)
ProbableCause: 111 0x6f (Timeout)
ProbableCauseDescription: "ASR Reboot Occurred"
ProviderName: "HP Recovery"
ProviderVersion: "2.4.0.0"
RecommendedActions[0]: "Determine the nature of the Automatic Server Recovery (ASR) event, and take corrective action."
Summary: "ASR reboot occurred"
SystemCreationClassName: "HP_WinComputerSystem"
SystemFirmwareVersion[0]: "2007.06.28"
SystemFirmwareVersion[1]: "2007.06.28"
SystemGUID: "30303734-3436-4247-3837-33385732454E"
SystemModel: "ProLiant ML370 G5"
SystemName: "bv1sv003s.company.lan"
SystemProductID: "470064-483"
SystemSerialNumber: "GB8738W2EN"
TIME_CREATED: 129198995418987299 0x1cb01cd43493b23

For more information, please contact HP Support.

After the ASR in the IML appeared for 20 times the following event:

Caution Maintenance 06/01/2010 23:55 06/01/2010 23:55 1 Power cap cannot be reached with current server configuration.

Anyone, ideas?

Thank you.
2 REPLIES

Re: ASR ML370 G5

last firmware and driver update and check processor.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Raducanu Robert
Occasional Contributor

Re: ASR ML370 G5

How should I check the processor?