ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ASR - in degraded mode

intahiti
Occasional Contributor

ASR - in degraded mode

Hi all,

I had an ASR reboot on 4 servers, but after launching the HP log viewer: mark all repaired , the warning is always present...

Last Reset: ASR - Cleared


I you have an idea...
regards
5 REPLIES
Prashant (I am Back)
Honored Contributor

Re: ASR - in degraded mode

Hi,

Try out 2 things.
1. check the iml log for the server. share the details for the same.
2. Disable the ASR on one server if possible to check the season for ASR to happen. ASR monitor the server heartbeat if it come to non responsive state it reboots. so disable it for testing purpose only..

Prashant S
Nothing is impossible
Marek Nelec
Honored Contributor

Re: ASR - in degraded mode

Of course it is present, you only marked it as "repaired", so the management agents will know that the server is not in critical state.
If you want to get rid of this messages, clear the Integrated Management Log(s)
intahiti
Occasional Contributor

Re: ASR - in degraded mode

do you know what ? it doesn't work...

when I'm clearing the IML, I have the same message...

The last solution is to reinstall it ?
Marek Nelec
Honored Contributor

Re: ASR - in degraded mode

Try the SmartStart CD. Boot from the SmartStart CD, and then: Maintain Server > HP Insight Diagnostic > Log TAB > Integrated Management Log TAB, and clear the log here. I kwow some cases that needed this method of clearing IML.
The latest version of Smartstart CD is here:
http://h18023.www1.hp.com/support/files/server/us/download/26397.html
intahiti
Occasional Contributor

Re: ASR - in degraded mode

ok thank you for reply,

but it's a little hard to cleared by this methode