cancel
Showing results for 
Search instead for 
Did you mean: 

About DL380 G3

 
YANG PING CHIEN
Occasional Contributor

About DL380 G3

Hi!Everybody. I have one question. How to identify or enable when i installed second CPU or more?

Thanks

Allen Dec-9-2004
3 REPLIES
Robin_37
Trusted Contributor

Re: About DL380 G3

You can have two processors in DL 380 G3 server. when you switch on the server it will display number of cpu.or you can use windows task manager .
suppose you installed OS(windows2000) in the server using single processor and later on if you have added one more processor then you need to add the driver for the multi processor.

Ivajlo Yanakiev
Respected Contributor

Re: About DL380 G3

Also there new tehnology :) hyper treading if you enable this in bios you will see CPU X2.
Nick Mogen
Occasional Visitor

Re: About DL380 G3

If you install Windows server with 1 CPU and add a second one later, there is an additional step to make the O/S use the second CPU. You need to upgrade the HAL. Here is the link to the procedures for doing so:

http://support.microsoft.com/default.aspx?scid=kb;en-us;234558