ProLiant Servers (ML,DL,SL)

About M.2 SFF Flash Adapter with 2x UFF HDD cage for DL20 Gen10

 
SOLVED
Go to solution
mysy
Valued Contributor

About M.2 SFF Flash Adapter with 2x UFF HDD cage for DL20 Gen10

I get two HPE SFF Flash Adapter (815605-B21) with Dual Micro Form Factor uFF , try to use them for my DL20 G10 home server, but after I install 2 480G hpe oem m.2 sdd, it only could read the left slot M.2 SDD from my server. I put two m.2 SDD(ngff SATA protocol) inside. My DL20 G10 have E208i-a HBA card(Mini SAS×2) for the 4x 2.5 sff slot.  When I put those two same m.2 SDD to other PC .both them are working fine. 

 Snap1.jpgSnap2.jpg

 

I search the document that this uff adapter is use for BL480 server.  I want to know if any way could use it with my DL20 G10 server and E208i HBA mode.  

 

If not enable to support two SSD in one 2.5 sff slot, I plan to sell it in China local e-mark taobao and get other bigger SATA 2.5 SSD directly.

2 REPLIES 2
SanjeevGoyal
HPE Pro

Re: About M.2 SFF Flash Adapter with 2x UFF HDD cage for DL20 Gen10

Hello,

 

No any other option.

You have to use only supported components with the HPE serves.

Please follow the below documents for your reference.

HPE ProLiant DL20 Gen10 Server Quick space ( Follow the page no#25)

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00053820enw#

 

 

Read Intensive - NVMe - M.2 - Solid State Drives

HPE 480GB NVMe Gen3 Mainstream Performance Read Intensive M.2 22110 PE6010 SSD P24188-B21

Notes:

− M.2 SSD can be installed either on system board or on dedicated iLO module (HPE DL20/ML30 Gen10

M.2/Dedicated iLO and Serial Port Kit - P06687-B21).

− Running at PCIe 3.0 x2 speed on DL20 Gen10.

− Not supported by HPE Smart Array controllers.

− When installing NVMe x4 M.2 480 GB SSD module, the supporting ambient temperature should be under

30°C (86°F).

Internal Dual M.2 Kit

 

https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=a00053820enus

 

Storage Controllers

Software RAID

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller

will be needed, and for CTO orders please also select the Legacy mode settings (758959-B22).

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled by selecting 784308-B21.

NOTE: The S100i is a 14-port SATA controller, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options

on the Primary Riser.

NOTE: The S100i supports windows only.

HPE ProLiant DL20 Gen10 Server - Option Parts

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00059857en_us

 

HPE ProLiant DL20 Gen10 Server - Spare Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=a00059858en_us&docLocale=en_US

 

Please feel free to contact me if you have any further questions or concerns.


I am a HPE Employee

Accept or Kudo

mysy
Valued Contributor
Solution

Re: About M.2 SFF Flash Adapter with 2x UFF HDD cage for DL20 Gen10

Thanks.

I plan get other 875581-b21 nvme 22110 960G for my DL20 G10. keep the 2.5sff with intel SSD and 2T 2.5 HDD.

Just use for homelab study, specific model is too expensive for personal user.