HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Access Ultra3 SCSI BIOS

 
Matt Mascarich
Occasional Contributor

Access Ultra3 SCSI BIOS

I have a Compaq 64-Bit/66-Mhz single channel
Ultra3 SCSI adapter, how can I get into the SCSI bios to change some settings like transfer rate? (Like how CTRL+A works on adaptec cards)
3 REPLIES
Baumgartl Alex
Frequent Advisor

Re: Access Ultra3 SCSI BIOS

F8 at startup (spinning SCSI)
Baumgartl Alex
Frequent Advisor

Re: Access Ultra3 SCSI BIOS

oh, sorry. it`s for RiLo Board. :-/
Gert Luyten
Respected Contributor

Re: Access Ultra3 SCSI BIOS

The BIOS settings for this Compaq SCSI board can only be set in the server's BIOS during boot.
Press F9-RBSU for new Proliant models (f.i. ML370G2) or F10-SCU for older ones (f.i. PL3000).
Don't forget to update the server's firmware and SCU if it's an older model otherwise it will not recognize the SCSI adapter.


A Proliant a day keeps the competition away!