Access command line from HP Service Pack for ProLiant

[gulier8268812]

Anyone have any idea if this "2.28 b" firmware rev would load on an MSA 60?

http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=us&swItem=MTX_b052a862ea8546de8b0387846c

Not sure I remember the difference between a 60 & 70.

[gulier8268812]

HP Support is esclating up the line.

[gulier8268812]

After all was said and done all L2 could tell me was not supported with a P421.

[Laurent_11]

Same issue here. MSA60 with cp013530.scexe. Used the FW CD 9.30 (tried newer versions, older versions, etc). The MSA is not detected to be updated from 1.50 to 2.28. I tried command line and I get the "No devices updated" message.

MSA60 is connected to P812 with latest firmware (6.60).

What am I supposed to do? If I type the -h switch, I get the following:

-d <file>     Dumps discovery information in XML format to <file>

-g|-f|-e       Force reflashing of supported items

-i<ROM>    name of ROM file to flash (required)

-k(sw_key>  The firmware type in the XML

-q          Query hardware attached - humand readbale, see -d

-t(tag>     SCSI device tag of device (required - e.g. MSA60)

-v<version>   Version number of new ROM (required)

All that info above, I have no idea what I am supposed to do with it.