HPE Community
ProLiant Servers (ML,DL,SL)
1753677 Members
5613 Online
108799 Solutions
New Discussion юеВ

Re: Adaptec 3210S and ML310

 
SOLVED
Go to solution
Witpr├дchtiger Fritz
New Member

тАО01-26-2004 07:59 PM

тАО01-26-2004 07:59 PM

Adaptec 3210S and ML310

I will install ond Adaptec 3210S into ML310 (with ATA-Raid-Controller). If i do that, it could not find any other Harddisk's on the ATA-RAid. What's wrong on my Configuration?
0 Kudos
Reply
2 REPLIES 2
Sunil Jerath
Honored Contributor

тАО01-27-2004 09:17 AM

тАО01-27-2004 09:17 AM

Solution

Re: Adaptec 3210S and ML310

Hello,
Please make sure that the BOOT controller order is set properly in the BIOS set up. When you installed the Adaptec controller it took over the Boot Order whereas the boot drives are connected to the ATA Raid. Am I correct??

Regards,
Reply
Witpr├дchtiger Fritz
New Member

тАО01-28-2004 07:15 AM

тАО01-28-2004 07:15 AM

Re: Adaptec 3210S and ML310

Thanks very mutch. That was the problem.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.