ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Add disk to existing raid 5 proliant DL380 G5

BSMI
Occasional Visitor

Add disk to existing raid 5 proliant DL380 G5

Hello All,
i have 2 disk that i want to add into raid 5(3 Disk), i try using SmartCD but i can't find any solution to do this job, I hope this forum can help me to solve this problem.


Thank's
2 REPLIES
KarloChacon
Honored Contributor

Re: Add disk to existing raid 5 proliant DL380 G5

next time mentioning controller would be fine

but I think this is the same situation

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1317339
Didn't your momma teach you to say thanks!
Taifur
Respected Contributor

Re: Add disk to existing raid 5 proliant DL380 G5

Hi BSMI,

For RAID 5 you need minimum 3 disk.
If you have 3 Disk then you can do it as follows

1.Reboot server
2.At that time array card display & option F8 will be appear.
3.Press F8 (for entering ORCU-ooption ROM Configuration Utility)
4.select create array
5.select RAID5
6.save by pressF3
7.exit
8.then again reboot server
9.after that enter by pressing F8 (ORCU)
10.check it by view option

It will help you to solve your issue.

Rgds//
Taifur