ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Add diskgroup in Smart Array 642

Sturla Bjornsson
Occasional Visitor

Add diskgroup in Smart Array 642

I have an HP Proliant ml350 g4p server with a Smart Array 642.
I have one logical drive with RAID 5 (with a spare disk). It consist of 4 72.8 GB SCSI disks.
On this logical drive I have installed Oracle VM Linux (Xen).
These disks are located at slots 1,2,5,6.

I now wanted to add 2 x 136 GB disks in slots 3,4 and make a RAID 0+1 to use as spare diskspace in my Oracle VM.
When I add these disks as a logical drive in the ORCA and reboot the server, it tries to boot on the newly created drive and ignores the old logical volume. Is there any way to tell the server to boot on the old logical drive?

Best regards,
Sturla Thor