Added memory to a Proliant ML570 G4 Server

[Wtzone]

Have been trying to add an additional board to our ML570 G4 server.

I purchased a new board to add, added the exact same RAM that is on the orginal board in the server.

When I lock the new board in, I receive a beeping with all amber lights on the DIMM 1-6 area.

Could this be a defective board, its new?

P.S. This thread has been moved from Servers-General to ProLiant Servers (ML,DL,SL). -HP Forum Moderator

[Suman_1978]

Hi,

It could be a bad memory board or system board or even a bios issue.

First try to swap the memory boards just to make sure the system board slot is good.

Then update the BIOS and test.

Good Luck

Thank You!
I am a HP employee.