HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Added memory to a Proliant ML570 G4 Server

Occasional Contributor

Added memory to a Proliant ML570 G4 Server

Have been trying to add an additional board to our ML570 G4 server.

I purchased a new board to add, added the exact same RAM that is on the orginal board in the server.

When I lock the new board in, I receive a beeping with all amber lights on the DIMM 1-6 area.

Could this be a defective board, its new?


P.S. This thread has been moved from Servers-General to ProLiant Servers (ML,DL,SL). -HP Forum Moderator


Re: Added memory to a Proliant ML570 G4 Server



It could be a bad memory board or system board or even a bios issue.

First try to swap the memory boards just to make sure the system board slot is good.

Then update the BIOS and test.


Good Luck

Thank You!
I am a HP employee.