HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding External HD to ML 360 (non-scsi)

 
Skip_10
Occasional Contributor

Adding External HD to ML 360 (non-scsi)

Anyone have experience with SATA controllers?
Tried to put a Promise card in this system, but won't boot to SCSI drives. (tried moving card to higher PCI slot, but got corrupted bios area message). Any help would be appreaciated.
2 REPLIES
kcpant
Trusted Contributor

Re: Adding External HD to ML 360 (non-scsi)

hi,

if you installed an additional ATA card, it will take highest priority to boot up. if it is possible, either disable the BIOS of ATA card, or set the boot controller order to SCSI in SCU/RBSU.

regards
PreSales Specialist
Skip_10
Occasional Contributor

Re: Adding External HD to ML 360 (non-scsi)

Thanks for the Reply, but this is the problems. I can't find an ide ata controller card that will let you turn off Int 13 or disable the bios. That is why I am asking if anyone has experience with SATA controllers. Do the SATA controllers have a Controllable Bios?