1748227 Members
4149 Online
108759 Solutions
New Discussion

Adding Hard disks

 
Ayman Altounji
Valued Contributor

Adding Hard disks

I am trying to add 2 additional hard disks to a Smart Raid Array. When I use Smart Start I am not given the option to add them to an array, but I can see the hard disks. I was wanting to use the Array Configuration Utililty but cannot find a version for the 1500. The version of Smart Start that I am using is 4.90.

Any ideas of where to go?
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: Adding Hard disks

If you are using a SMART card you will have to configure the controller using the System Configuration Utility. The old SMART card does not use the Array Configuration Utility.