HPE Community
ProLiant Servers (ML,DL,SL)
1753903 Members
10150 Online
108810 Solutions
New Discussion

Re: Adding a new HS 36GN HDD

 
Ayman Altounji
Valued Contributor

‎07-15-2001 04:00 PM

‎07-15-2001 04:00 PM

Adding a new HS 36GN HDD

I currently have 3 x 9.1GB HS in a RAID 5 cofig. Server was running out of disk space, so when to purchased a new 36GB SCSI drive with the HS tray. Once I added the new drive in, the server won't boot. Any suggestion?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎08-10-2001 04:00 PM

‎08-10-2001 04:00 PM

Re: Adding a new HS 36GN HDD

Eddie,
Check the firmware revision of your array controller to be sure it is up to date. You did not note if there were any post error codes (17xx) or where the boot process stopped. Remember that if you add this drive to the same array as the 9.1 gig drives are in, you will only get 9.1 gig out of the drive.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.