HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a second RAID controller in Linux

 
SonosAdmin
Occasional Visitor

Adding a second RAID controller in Linux

Hello,

 

I have an HP ML350 G4, that we installed a 2 bay drive cage. The current RAID 641 controller is connected to the 6 bay on the server, and the controller is sitting in Slot 3.

 

We ordered a 642 controller and installed it into slot 5, when reboot the the drives that were on RAID 641 moved to a different device number.

 

I know that the device number on slot 3 is 2, and on slot 5 is 1, so I figured that is why the drive on the 641 had moved. So to the question is, if we moved the 641 controller to slot 5, and the 642 to slot 3 would it cause any issue with the RAID configurations we have?

 

Thanks