Adding drives to a DL380 g3 Cluster

[gjjohnson]

Can anyone point me to some good links or documentation? I am about to add 2 hot-swap 146 gb ulta 320 drives(matches the others) to my storage library. I have 2 seperate RAID setups - I want to plug them in then expand volumes with the new space. I think it should go smoothly I just wanted to read up first to make sure I prepare for any issues. Thanks a lot in advance.

[raadek]

That heavily depends on your OS. You shouldn't have any trouble with on-line expansion of your RAID sets via ACU though.

IF you have Windows OS you may have a look at this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1038527

Rgds

[NMory]

You can check these links:

ftp://ftp.compaq.com/pub/products/servers/proliantstorage/drives-enclosures/hp%20hard%20drive%20replacement.pdf


ftp://ftp.compaq.com/pub/products/servers/proliantstorage/drives-enclosures/Procedures%20of%20expanding%20active%20volume%20with%20W2000.pdf

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294139/c00294139.pdf

LN