ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding logical drives to existing array after swaping (failing) drives for larger drives

Ayman Altounji
Valued Contributor

Adding logical drives to existing array after swaping (failing) drives for larger drives

Is there an estimate on how long the Parity Initialization should take? In the Array Configuration Utility ( CPQONLIN), for the Logical Drive Information, status reads "Background Parity Initializing in progress".Netware 5.1smart 221 controler had 4 9's faild drives replaced one by one with 18's Then created a new RAID5 logical drive. Status message has been unchanged for over 5 hrs now. advice welcome as no % bar for time to go.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Adding logical drives to existing array after swaping (failing) drives for larger drives

Just to let you all know I had a reply with the above 4 days later.