HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding new Hard disk to the Raid

 
Cyberbot
Occasional Contributor

Adding new Hard disk to the Raid

Hello Guys,
i am wondering who advise me how to add new RAID to my server
i am using 6 Disk ( 3 clone) so have still place for two,
can someone please advise how to add new RAID to the server?and for Ultility do i need to use?HP Array Configuration Utility Software? or somethind different?

Regards
3 REPLIES
JKytsi
Honored Contributor

Re: Adding new Hard disk to the Raid

put the disks in and use the ACU utility. It's very straight forward.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
marcus1234
Honored Contributor

Re: Adding new Hard disk to the Raid

cyberbot if you have battery and cache on controller you can do it in the os via ACU,

you cna check if you have these by going into HP sys tools HP acu , lookk for battery and cache

if not boot from the psp software cd and follow the wizzard


it quite straight forward and will guide you

This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33



Cyberbot
Occasional Contributor

Re: Adding new Hard disk to the Raid

Thank you so much for the answer
it my first time here so dont know how to answer you,
i would like to have this disk to boot with as i lost it,
and if possible tutorial or PDF here to read

The answer helped with a portion of my question, but I still need some additional help!