HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding raid1 drives to ML150

 
Dagur Hilmars
Occasional Visitor

Adding raid1 drives to ML150

Hello all,
I just got two 250gb sata drives to add to my ML150. When i enable sata raid in bios, the windows small business server os runs into blue-screen and restart during boot up.
is that because the os does not have the sata raid drivers installed?
how can i install them without losing any data on the os? and exacly what drivers should i install?
any assistance is highly appreciated!

looking forward to hear from you people
thanks in advance
dagur
1 REPLY
Dagur Hilmars
Occasional Visitor

Re: Adding raid1 drives to ML150

Had the main c: drive connected on ch 1 when installed SBS with raid disabled.
I'm out of ideas how to make SBS start with the raid enabled on the embedded sata controller.

any ideas?