ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Adding second processor

Ayman Altounji
Valued Contributor

Adding second processor

We want to add second processor into our Proliant 6000 with
PentiumIII Xeon 500 Mhz installed. After adding and power on,
we saw the following message.

"Unsupported processor type"
"System halted"

Proliant recognized processors as:
Slot1: Pentium Xeon at 500Mhz with 512 kb cache <- old processor
Slot2: Pentium Xeon at 500Mhz with 2 Mb cache <- new processor

Then we removed old processor, but it was the same result.

If the problem is outdated BIOS,
what BIOS update (version) do we need for remedy?