HPE Community
ProLiant Servers (ML,DL,SL)
1753424 Members
5245 Online
108793 Solutions
New Discussion юеВ

Adding stande alone disk to proliant DL380 G4

 
DanielATU
Advisor

тАО02-18-2008 05:14 AM

тАО02-18-2008 05:14 AM

Adding stande alone disk to proliant DL380 G4


Dear All.
I have a simple question (I am newbie to proliant and HP servers :)) but i didn't found answer in internet.

I have HP Proliant DL380 G4 - OS Linux
There is raid 5 with 5 disks, and one empty slot, I want to add additional stand alone disk that will not be used in raid in empty slot.

I inserted disk into bay, but it doesn't showed up in /dev/ what shoul I do to connect it?

Thank you in advance.
0 Kudos
2 REPLIES 2
DanielATU
Advisor

тАО02-18-2008 05:16 AM

тАО02-18-2008 05:16 AM

Re: Adding stande alone disk to proliant DL380 G4

Please delete this tread, it was created by mistake :(
0 Kudos
Torsten.
Acclaimed Contributor

тАО02-18-2008 05:17 AM

тАО02-18-2008 05:17 AM

Re: Adding stande alone disk to proliant DL380 G4

The disk bay is connected to the RAID controller, for this reason all disks are under control of the controller.

You need to create a RAID0 drive on this disk or add the disk to the existing array and create a new logical drive.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.