HPE Community
ProLiant Servers (ML,DL,SL)
1753785 Members
7282 Online
108799 Solutions
New Discussion

Re: Adding the same 9GB SCSI drive to an existing array

 
Ricardo Joseph
New Member

‎06-14-2004 09:40 AM

‎06-14-2004 09:40 AM

Adding the same 9GB SCSI drive to an existing array

I have been unable to run the Array Configuration Utility to configure an additional Array via an added drive on a DL 380 G1 production server.

F10 at boot-up shows the drive but does not prompt me to configure the Array.

I also updated the drivers for the Array; however, I have not been able to confirm the results of this action without arranging scheduled downtime.

Any suggestions,
Thank You,
Joseph
0 Kudos
Reply
1 REPLY 1
JohnWRuffo
Honored Contributor

‎06-14-2004 12:12 PM

‎06-14-2004 12:12 PM

Re: Adding the same 9GB SCSI drive to an existing array

Joseph:

have you tried using the ACU diskette version:
http://h18023.www1.hp.com/support/files/server/us/download/15125.html
You will have to use the makedisk.bat to create the disks.

As for configuring the boot prompts, you may need to reconfigure the system settings. Click here for the System Configuration Utility:
http://h18023.www1.hp.com/support/files/server/us/download/13227.html

G'luck!
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.