HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Adding the same 9GB SCSI drive to an existing array

Ricardo Joseph
Occasional Visitor

Adding the same 9GB SCSI drive to an existing array

I have been unable to run the Array Configuration Utility to configure an additional Array via an added drive on a DL 380 G1 production server.

F10 at boot-up shows the drive but does not prompt me to configure the Array.

I also updated the drivers for the Array; however, I have not been able to confirm the results of this action without arranging scheduled downtime.

Any suggestions,
Thank You,
Honored Contributor

Re: Adding the same 9GB SCSI drive to an existing array


have you tried using the ACU diskette version:
You will have to use the makedisk.bat to create the disks.

As for configuring the boot prompts, you may need to reconfigure the system settings. Click here for the System Configuration Utility:

Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt