AlertMail is not working

[Adrivium]

I'm running a DL380 Gen8 with iLO 4 and just installed a 60-day iLO Advanced trial, but cannot get the AlertMail to work.  At this point, I've only used the "Send Test AlertMail" button to test, but I'm not getting a test email.

The SMPT server is a VM (WS 2012 R2) on the box (host is Hyper-V Server 2012 R2).  Along with checking the "Enable iLO AlertMail" checkbox, I've configured the fields as follows:

Email Address:  [myemail]@[mydomain].com
Sender Domain: [MyDomain].com  <-- (I'm unsure what role this plays or if the entry is correct)
SMTP Port: 25
SMTP Server: [server].[mydomain].com  <--(I've also tried the internal IP [192.168.10.xx], but that didn't work either).

I don't know what to try next and would be very grateful for a point in the right direction as I have a couple new servers I will need to configure as well!

Thanks!
-Adam

[Harsh_b · Accepted solution]

Hello, 

Please check the below article if same helps

https://support.hpe.com/hpesc/public/docDisplay?docId=sf000045212en_us&docLocale=en_US

Regards