HPE Community
ProLiant Servers (ML,DL,SL)
1753425 Members
5111 Online
108793 Solutions
New Discussion

Alter temperature warning threshold on Proliant servers (gen 8)

 
Rich2rd
Occasional Contributor

‎01-15-2014 11:36 PM - edited ‎01-16-2014 01:10 AM

‎01-15-2014 11:36 PM - edited ‎01-16-2014 01:10 AM

Alter temperature warning threshold on Proliant servers (gen 8)

 

Hi!

 

Is it possible to change temperature warning threshold on a ProLiant DL360p Gen8? Where? What utility?

 

I have read in two threads that it is not possible, but they were quite old, and this might have changed...

 

http://h30499.www3.hp.com/t5/ITRC-HP-Systems-Insight-Manager/Change-temperature-warning-threshold-on-Proliant-servers/td-p/3204416#.UtZZn7Ru3ZM
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/Adjust-Proliant-Server-Threshold/td-p/4454141#.UtehV7RG2MI

 

Regards

 

Richard

0 Kudos
Reply
1 REPLY 1
Rich2rd
Occasional Contributor

‎02-05-2014 07:37 AM

‎02-05-2014 07:37 AM

Re: Alter temperature warning threshold on Proliant servers (gen 8)

Got a reply from HP support, and apparently these figures can not be altered....

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.