ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Array Config Utility

 
Peter Knowles
Occasional Contributor

Array Config Utility

Is there a way for a Proliant ML350 G3 with Array Config Utility 6.40.x to determine the progress of the background parity initialization?

We have a 641 RAID controller, set to high expand/rebuild priority. Array is RAID5, 4 72Gb 10K drives (plus a spare).

Coming up on 5 days. I know it takes time especially with large arrays.

Just trying to check 'under the hood'.

Thanks
2 REPLIES
Ruslan
Respected Contributor

Re: Array Config Utility

HI Peter!

Is there any data on logical rives? You must write some data files for parity building begin
Peter Knowles
Occasional Contributor

Re: Array Config Utility

Yes, there is data.

But a big update from overnight: the parity initilaization completed.

I had just hoped to be able to predict/know when it was going to complete.

I did a bit more research, and saw there was a command-line mode for the ACU. We'll look into how to use this.

Thank you for your interest in our question!

Pete