HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Array Configuration

 
Ariel Mara
Occasional Contributor

Array Configuration

Hi all,
I got a Prolian ML110 server with 2 HD BD03695CC8.
I bought an adaptec 2120s card in order to configure the ARRAY.
And also bought a new HD, But logistics gave me this disc model BD03695A27.
It's the same size and speed as the ones I got, the difference is de Firmware version. The new one is Hpb7 and the others is HPb6
The problem is when a try to configure the array, when booting it says:
Controller Kernel Panic! and it wont boot or either let me configure the array. If I connect the old ones without the new one it works great, and if I connect only the new HD it also works great.
Should it be the firmware version? How can I do to configure the Array?
Thanks a lot!
4 REPLIES
KarloChacon
Honored Contributor

Re: Array Configuration

ML110 generation 1?

regards
Didn't your momma teach you to say thanks!
Ariel Mara
Occasional Contributor

Re: Array Configuration

I think so. It says ML110T01 on the back. It's a gray one and I got a black one that says ML110G3......so...I suppose the one with the problem is G1
KarloChacon
Honored Contributor

Re: Array Configuration

try updating the old HDD with the latest firmware

http://h18023.www1.hp.com/support/files/storage/us/download/26461.html

because there are different version of HPB6(C,D,E)

E is the latest, after doing that add the new HDD

regards
Didn't your momma teach you to say thanks!
Ariel Mara
Occasional Contributor

Re: Array Configuration

OK, finally I downloaded the cd in order to do the HDD Firmware Update. I boot with version 7.40b, last version wont boot on ML110 G1.
Copied the update rom file into a diskette.
and.....When tring to load the ROM File it says: Unable to copy File cp007264.scexe to destination directory for processing.

What is wrong? I tried to copy the file on a Kingston USB flash drive but it doesn't load from it.

How can I Update the HDD Firmware???? I'm going crazy trying to do it!