ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Array Controller failure

Ayman Altounji
Valued Contributor

Array Controller failure

Proliant 3000 failed to boot up due to the message - "slot 5 Compaq Smart Array 3200 Controller".
How do I go about bringing up the server?
Is there an early detection before I encounter such message?

Mark Cloutier
Respected Contributor

Re: Array Controller failure

If you are getting a CMD=11h error, more than likely the 3200 is defective. You can try to re-seat the controller, daughter board or even try to flash the firmware on it. For pre-failures use Insight Manager.
We are here for a good time, not a long time!