ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Array controller gives temperature warning

Ayman Altounji
Valued Contributor

Array controller gives temperature warning

The message I'm getting is this:

CPQARRAY - The Compaq Array Controller in slot 3 reports the storage enclosure on port 1 is nearing the preset temperature limit.
Please take corrective action.

After about 30 minutes it generates another message telling me that it has returned to normal temperature. Can someone tell me what is causing this and whether the problem lies in the controller itself or in one of the 3 18GB hard drives I have in the server.
Thank you
Don
1 REPLY
Mark Cloutier
Respected Contributor

Re: Array controller gives temperature warning

it could be a bad sensor on the motherboard...run diags and see if it detects anything
We are here for a good time, not a long time!