Assign Server Profile

[bhanuprat92]

I wanted to know if I have a blade in one enclosure and then I remove this blade from present enclosure and then place it in new enclosure then will I have to again assign a new profile to server.

Can we use old server profile by unassigning the hardware from profile and after it gets placed in new enclosure then again assigning it to hardware.

[derick_souza]

@bhanuprat92 

If it is a server of the same model and the same configurations, you can use the same profile.

but if is a differente model and configurations, you should create a new profile.

[bhanuprat92]

Hello,
Both are c7000 enclosures and blade will be moved from one to other.
Do I need to recreate a new profile when after moving the blade in new enclosure(this will lead in new WWPN)