cancel
Showing results for 
Search instead for 
Did you mean: 

B110i ML110 G6

sandsjh
Occasional Visitor

B110i ML110 G6

I searched "B110i" in the "board" section and did not see my answer. Now, on to the problem. This is excructiatinly painful. I absolutely cannot get windows 2008 R2 to install on ML100 G6. I have tried an USB key, external dvd drive, virtual disk on/off, SATA compatible mode,  everything I have found listed in Google.

 

Please help :)

=========================

Smart Update Firmware DVD v9.20 -

ran and no updates found

 

 

Select the driver to be installed:
Browse:
(USB stick) C:\cp013026\HpAHCIsr.inf (also tried cp...28 drivers)
Checked: Hide drivers...
"No new devices could be found. Make sure the driver files are correct and located on the driver installation media."

 

 

 

ML110G6:
Driver storage: v6.14.0.64
Driver storage controller: v6.20.0.64
Software: storage controller
HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2003 and Windows Server 2008 x64 Editions 

 

1 REPLY
sandsjh
Occasional Visitor

Re: B110i ML110 G6

Fixed. I deleted the logical volume, changed RAID to AHCI in BIOS and then used gparted to delete the partitions/mbr. Now I went back and changed to RAID in BIOS and setup my logical volume.

 

Also, I re-downloaded 2008R2 from the Licensing Store.

 

 

Booted up with external DVD, browsed to the extracted cp013026.exe, added the driver, and now I have Server 2008R2 on my ML110G6 :-)

Flyer than a G6.