ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

B110i RAID ARRAY

kkcomp
Occasional Visitor

B110i RAID ARRAY

Hi, I have a server with a RAID 1 array set up using 2 500GB Hard drives. I want to increase the hard drive size to 2TB and was wondering what the best way to do this.  I have already replaced the hard drives and rebuilt them but I can't find an options to increase partition size.

 What is the best way about doing this?

2 REPLIES
Torsten.
Acclaimed Contributor

Re: B110i RAID ARRAY

AFAIR this is not possible with this controller. Consider to backup data, re-create the logical drive and restore.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
kkcomp
Occasional Visitor

Re: B110i RAID ARRAY

Thanks for the repsonse, that is the way I've read before.  It's not very practical though as it's on site and there is a lot of data.  I was hoping there was a faster way.  For instance if I removed one of the hard drives and put in on another computer, could I increase the partition size and then put it back into the server. would the remaining hard drive rebuild to the correct size.  

 

I want to have all the info before I call there again

 

Thanks