cancel
Showing results for 
Search instead for 
Did you mean: 

BIOS Setup

Ayman Altounji
Valued Contributor

BIOS Setup

How can I enter the BIOS Setup ? When I enter F10 on a cold boot I do not get the BIOS Setup screen. All I am trying to do is disable the in-built NIC as I think it is giving me intermittant Kmode failure messages.
1 REPLY
Ayman Altounji
Valued Contributor

Re: BIOS Setup

You need to select System Configuration after the F10 menu, but if you don't have a system partition configured on that server you won't be able do much at the F10 prompt. Alternatively you can run System Configuration Utility (SC) by booting from the Smart Start DC or by down loading the SC, generating the diskettes and booting from them. Then you can disable the inboard NC. Good luck.