ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL20p Deployment using RDP 1.6, Dos image does not work

 
Emad Safwat
Occasional Visitor

BL20p Deployment using RDP 1.6, Dos image does not work

I've been trying to deploy 5 BL20p Blade servers using the RDP 1.6, the process works just fine after the server boots, they get IP addresses from the Local host DHCP server, the DOS image is sent to the server, then it gives the following message "Tranferring Control to DOS boot Diskette Image" & it Hangs
Knowing that I tried several different boot images

Can any one help me out here