HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL20p G2 Hyper Threading

 
Ralf Grashoff
Occasional Visitor

BL20p G2 Hyper Threading

Hello!

We have got 7 BL20p G2 2,8 Ghz, 2,5 GB RAM, Windows Server 2003, configured as Terminalserver with NLB-Clustering. If Hyper-Threading is activated, the servers will reboot with a stop 0xc2. All of them. If Hyper-Threading is deactivated the servers still running. Why????? Any ideas???

best regards

Ralf
2 REPLIES
Ole Thomsen_1
Trusted Contributor

Re: BL20p G2 Hyper Threading

We use BL20p G2 3GHz for WTS 2003 with NLB and never see this error.

According to MS it is a fault device driver or program, http://support.microsoft.com/default.aspx?scid=kb;EN-US;314492

Ole
Ralf Grashoff
Occasional Visitor

Re: BL20p G2 Hyper Threading

Hi Ole!

Thanks for reply - i knew the ms kb... ;)
Today i have talked with a hp-supporter - it seems to be a problem with a software, which is incompatible with the Hyper-Threading. I don´t know how, but i will try to get a full kernel-dump.........

Ra