ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL20p G3 in original enclosure - network port issues PP2

Mark Leffler
Advisor

BL20p G3 in original enclosure - network port issues PP2

I have a customer who is using a BL20G3 in a non-enhanced enclosure. We verified per the HP matrix that this model will wotk in the old enclosure.

This blade was provisioned in an open slot in an enhanced enclosure. When moved to it's final destination in the older enclosure, neither the iLO nor a data port can be seen at it's already set DNS name. (keep in mind this blade was fully deployed and on-line in the enhanced enclosure, so I do not suspect hardware in this case). Both the new and old enclosures use the pass-thru patch panels.

It was my understanding that a G3 in a new enclosure would still have the iLO map to the 1st port and the PXE nic map to the 3rd port. Any suggestions?