BL20p ILO NOT CONNECT

[Francisco Alarcon]

Hello.
I change the motherboard of Blade BL20p, and when I going to connect to the ILO by means of RDP I recived a error message.
I don't Know if it's necesary to configure something when the motherboard change.

Thank you

[Steven Baillie]

hi
yes see following for required changes

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_CN0178W



steven

[Oleg Koroz]

are you trying ILO or NIC PXE ?

Verify settings for ILO (either from F8 for DHCP, static IP, configure .... )

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00257375/c00257375.pdf
http://docs.hp.com/en/238882-005/238882-005.pdf

[JS_10]

Hi,

In most cases this problem is due to memory.

Try with no Dimms and after with only one.

If everything works insert the other Dimms

[Francisco Alarcon]

I change de switch 8 on the board DIP1 to ON position. Then start server and acces to the ILO with the diagnostics wire. The User is Administrator and password in blank.