ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL20p ILO NOT CONNECT

Francisco Alarcon
Occasional Advisor

BL20p ILO NOT CONNECT

Hello.
I change the motherboard of Blade BL20p, and when I going to connect to the ILO by means of RDP I recived a error message.
I don't Know if it's necesary to configure something when the motherboard change.

Thank you
4 REPLIES
Steven Baillie
Trusted Contributor

Re: BL20p ILO NOT CONNECT

Oleg Koroz
Honored Contributor

Re: BL20p ILO NOT CONNECT

are you trying ILO or NIC PXE ?

Verify settings for ILO (either from F8 for DHCP, static IP, configure .... )

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00257375/c00257375.pdf
http://docs.hp.com/en/238882-005/238882-005.pdf
JS_10
Occasional Advisor

Re: BL20p ILO NOT CONNECT

Hi,

In most cases this problem is due to memory.

Try with no Dimms and after with only one.

If everything works insert the other Dimms

Francisco Alarcon
Occasional Advisor

Re: BL20p ILO NOT CONNECT

I change de switch 8 on the board DIP1 to ON position. Then start server and acces to the ILO with the diagnostics wire. The User is Administrator and password in blank.