HPE Community
ProLiant Servers (ML,DL,SL)
1751878 Members
5588 Online
108782 Solutions
New Discussion

Re: BL20pG1 /G2

 
Peter Loeffel
Occasional Advisor

‎05-30-2005 12:50 AM

‎05-30-2005 12:50 AM

BL20pG1 /G2

RDP 1.60 / and 2.0 with G1 Server is working
with the G2 servers i got error:
Every time he tried to initialize a new blade the whole procedure was corrupted as soon as the bootworks application was running.
Specifically a crash dump page appears starting with:
"Exiting due to signal SIGVER"
"Page fault at eip=0008908a"
0 Kudos
Reply
1 REPLY 1
Peter Loeffel
Occasional Advisor

‎05-30-2005 12:51 AM

‎05-30-2005 12:51 AM

Re: BL20pG1 /G2

Finally we overcame the problem typing the command: "bootworks -dsbios" at the command prompt just after the procedure corruption.
This is the way we are working till now as a workaround and customer is expecting a final solution.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.