BL25p w/ Single Core

[Mike Lam_6]

I Have Put A BL25P (374799-B21) Into A Enclousre (281404-B21). It Hang Up After
Showing 2 Processor Units, Why?

[Oleg Koroz]

is a both CPU single core ?
System ROM up to date ?
Who did added Second CPU ?
different Bay
Reset NIC, Array Cards and Fiber if available

[Oleg Koroz]

BTW. what type memory you have any mix ?

[Mike Lam_6]

No Addtional Part Added. All Standard Come w/ The Server. 2 Processor, 4 x 512MB RAM

[Mike Lam_6]

BTW, It's Brand New & Just Open Box.

[Oleg Koroz]

Swap one component at time with second BL25p if Possibly: NIC or Array Card and Fiber if available.
Verify if both Opteron 2xx Identical

Reduse Memory
find Jumper box and Clear CMOS (Reset NVRAM)

[Mike Lam_6]

Actually, HP Service Team Replace All The Parts Except HDD & Chassis, Problem Still Here~~~~~

[Oleg Koroz]

Had you tried to power up without HDD
Try different Enclosure

It hard to believe that BUS backplane or Management module can cause to hung right after two CPU detected

PLS Reply â how it solve if you find problem


had you tried with one CPU ?

[Mike Lam_6]

1. No, Will Try To Do So
2. Yup, Same Result
3. Yup, Even 1 CPU, Same Result
4. I Have Loan A Test Unit Fr. HP Before I Place Order. Part # Exactly Same, Work For 3 Weeks Prefectly~~~~