HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL25p with "error on PCI configuration" on the HBA

 
Koopa
Frequent Advisor

BL25p with "error on PCI configuration" on the HBA

I have installed quite a few BL25p with Q-logic fibre cards. But recently i've had a few which on the POST. reports the "error on PCI configuration" and it wont let me CTRL-Q to look at it. I've swapped the card with a working fibre card, and it passes the POST. Anyone know if this is a known fault, or if there is a way around it?
1 REPLY
Oleg Koroz
Honored Contributor

Re: BL25p with "error on PCI configuration" on the HBA

wrong firmware used for QLogic ?
What is installed NC370i or NC77xx series ?
System ROM ?
reseat NIC ?
a failed Card has same problem in 2nd server ?

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=329290&prodSeriesId=1120361