HPE Community
ProLiant Servers (ML,DL,SL)
1753797 Members
8222 Online
108805 Solutions
New Discussion

BL30p Imaging problem

 
David_746
Advisor

‎09-30-2004 03:46 AM

‎09-30-2004 03:46 AM

BL30p Imaging problem

We are experiencing problems trying to image our BL30p servers. We are using HP RDP and we can create images from one blade, however when we put the image down to another blade the image loads successfully but windows blue screeens complaingin of inaccessable boot device.
We have tried images with Windows 2000 mirroring enabled and not.
Any ideas would be much appreciated!

Thanks
0 Kudos
Reply
1 REPLY 1
David_746
Advisor

‎10-01-2004 12:46 AM

‎10-01-2004 12:46 AM

Re: BL30p Imaging problem

It seems that the blades do not work if the image file has Windows drives configured as dynamic. The only way we could get it to work was to create an image with basic disks and once the image is on the blasde convert them to dynamic. Has anyone got round this?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.