ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BL460c G1 iLO 2 v1.42 won't power up

Rude
Occasional Contributor

BL460c G1 iLO 2 v1.42 won't power up

Some of our blade servers (BL460c G1) sometimes don't seem to respond to the 'momentary press' button to power on the system in iLO or Virtual Connect. There is another post where people experienced the same problem on a DL360. This was solved by replacing the system board. For some reason I think our situation with the blades is somewhat different. All 6 blades have been newly installed recently and all of them were upgraded with the most recent firmware versions. The same goes for all VC Onboard Admin modules.
I will, of course, report this issue to HP but I thought a post on the forum might also be useful so any hints, tips, tricks or ideas are welcome.

Thanks.

1 REPLY
Rude
Occasional Contributor

Re: BL460c G1 iLO 2 v1.42 won't power up