BOD after update CSP

[Ayman Altounji]

After installing the latest Compaq Support Paq, my NT server restart in BOD with the following:
STOP:0x0000007B (0xF7413BD8,0xC0000034,0x00000000,0x00000000)
INACCESSIBLE_BOOT_DEVICE

It was working perfectly fine before the update. Any idea ?!

[Sunil Jerath]

Hello,
Please try the following:

Try last known good if this doesn't work then perform the following:

1) Clear NV Ram

2) Upgrade the BIOS

3) Upgrade the SCU

4) Upgrade the firmware of your Smart Array Controller.

NOTE: If you want to try upgrading just the Array Controller Firmware you may run into conflicts with the old BIOS or SCU!

NOTE: Refer to Article ID: Q249214 on the Microsoft web site for more information.

If you require further assistance please feel free to contact our Tech Support at 1-800-OK-COMPAQ.

Regards,